Warranty; Safety Tips; General - Becker Centronic MemoControl MC441 Notice D'utilisation

Becker-Antriebe GmbH will be released from all warranty and product liability obli-
gations if the customer modifies the equipment without prior approval from
Becker-Antriebe GmbH or if the equipment is installed incorrectly and/or contrary
to the specified installation instructions, by the customer or a third party.
Any further processing must comply with all current statutory and official regula-
tions governing manufacture and advice to customers, especially the EMC regula-
tions.
This product is subject to technical developments and improvements. Please refer to
the current sales brochure for the precise product specifications.
Danger
Please keep the instructions in a safe place!
• Use in dry rooms only.
• Use unmodified Becker original parts only.
• Keep persons away from the system guide track.
• Keep children away from controls.
• Please comply with national stipulations.
• Dispose of used batteries properly. Replace batteries by an identical type
(LR 03; AAA) only.
• If the system is controlled using one or several transmitters, the system
guide track must be visible during operation.
The MC441 can be used to operate one or more roller shutter drives. This transmit-
ter can also be used to program switching times for UP and DOWN commands.
This device is excellent because it is so easy to operate.

Warranty

Safety tips

General

12
Operating Instructions