Selecting & Using Of The Menus - Aspire SkyStar Manuel D'utilisateur

Selecting and Using the Menus
If you are in TC mode and insert a new head, the display will show "New Atomizer" followed by "YES+/
NO-". Select "YES+" so that the device can automatically read out the resistance. Select "NO-" to
keep the previous head settings. (In TC mode, the device automatically detects and locks the head's
resistance. To ensure that the device operates correctly, please make sure that the head is at room
temperature when using it.)
In order to change the unit of temperature from Fahrenheit (F) to Celsius (C) in TC mode, increase the temperature
value to the maximum or minimum level. If you change the set value even further above or below this range, the
display will automatically switch to the other unit.
51