Setting The Memory Protect - Yamaha Digital Sound Projector YSP-3000 Mode D'emploi

Setting the MEMORY PROTECT

You can protect the settings you saved in the system
memory of this unit from being accidentally erased or
unwantedly changed.
1
Repeat steps 1 to 3 in "Using the system
parameters" on page 88.
2
Set the operation mode selector to YSP.
TV/AV
YSP
3
Confirm that "MEMORY PROTECT" is
displayed in the front panel display and
press ENTER.
ENTER
Adjusting the system parameters
4
Press / to switch between "PROTECT:
ON" and "PROTECT: OFF".
• Select PROTECT: ON to activate the protection
feature.
• Select PROTECT: OFF to deactivate the protection
feature.
5
Press STANDBY/ON on the remote control to
set this unit to the standby mode.
STANDBY/ON
The new setting will be activated when you turn on
the power of this unit next time.
ENTER
89
En