Using This Manual - Yamaha Digital Sound Projector YSP-3000 Mode D'emploi

Systeme acoustique numerique
Masquer les pouces Voir aussi pour Digital Sound Projector YSP-3000:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 112
Notes
• This manual describes how to connect and operate this unit. For details regarding the operation of external components, refer to the
supplied owner's manual for each component.
• Operations in this manual use keys on the supplied remote control of this unit unless otherwise specified.
• y indicates a tip for your operation.
• This manual is printed prior to production. Designs and specifications are subject to change in part as a result of improvements, etc. In
case of differences between the manual and the product, the product has priority.
1
Install this unit in your listening room.
See "Installation" on page 16.
2
Connect this unit to your TV and other external components.
See "Connections" on page 19.
3
Prepare the remote control and turn on the power of this unit.
See "Getting started" on page 30.
4
Run AUTO SETUP.
See "AUTO SETUP (IntelliBeam)" on page 35.
5
Play back a source.
See "Playback" on page 45.
6
Change the beam modes and/or CINEMA DSP settings.
See "Enjoying surround sound" on page 54.
7
Run MANUAL SETUP to fine-tune settings and/or set remote control codes.
See "MANUAL SETUP" on page 72 and "Remote control features" on page 96.

Using this manual

If you want to make additional settings
and adjustments
Using this manual
5
En

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Ysp-3000

Table des Matières