Connecting A Dvd Player/Recorder - Yamaha Digital Sound Projector YSP-3000 Mode D'emploi

Connecting a DVD player/recorder

Connect the coaxial digital output jack on your DVD player/recorder to the DVD COAXIAL DIGITAL INPUT jack on
this unit. When you connect this unit to your DVD/VCR combo player/recorder, connect the analog audio output jacks on
your DVD/VCR combo player/recorder to the AUX 1 AUDIO INPUT jacks on this unit in addition to the coaxial digital
audio connection.
y
To prevent the optical cable from being unplugged, affix the optical cable in the supplied cable clamp (see page 20).
Notes
• Check that your DVD player/recorder is properly set to output Dolby Digital and DTS digital audio signals. If not, adjust the system
settings of your DVD player/recorder. For details, refer to the operation manual supplied with your DVD player/recorder.
• If your DVD player/recorder does not have a coaxial digital output jack, make an optical digital audio connection instead (see
page 27).
ANTENNA
DOCK
Video signal to the TV
Audio
Audio pin cable
Digital audio pin cable
AUDIO INPUT OUT
VIDEO
AUX 1 TV/STB SUBWOOFER
*
For the DVD/VCR combo
player/recorder
connection
R L
Analog
audio
output
DVD player/recorder
Rear panel of this unit
(U.S.A. and Canada models)
DIGITAL INPUT
AUX 2 DVD
COAXIAL
OPTICAL
AUX 1 TV/STB
Coaxial
digital
output
Connections
XM IR IN
23
En