Muting The Sound; Adjusting The Volume - Yamaha Digital Sound Projector YSP-3000 Mode D'emploi

Adjusting the volume

INPUT +
VOLUME
VOLUME
MUTE
Press VOLUME +/– to increase or decrease the
volume level.
The numeric value of the volume level appears in the front
panel display.
Control range: MIN (minimum), 01 to 99,
MAX (maximum)
+
VOLUME
Front panel
Notes
• The volume level of all input sources (including multi-channel
as well as stereo sources) changes at the same time.
• One volume level increases or decreases each time you press
VOLUME +/–.
• You can continuously increase or decrease the volume level if
you press and hold VOLUME +/–.
STANDBY/ON
CH TV VOL
TV INPUT TV MUTE
VOLUME
or
Remote control

■ Muting the sound

VOLUME
MUTE TV INPUT
1
Press MUTE to mute the sound.
"AUDIO MUTE ON" appears in the front panel
display, and the volume level indicator flashes.
MUTE
2
Press MUTE again (or press VOLUME +/–) to
resume the sound output.
"AUDIO MUTE OFF" appears temporarily in the
front panel display (or the numeric value of the
current volume level appears if you press VOLUME
+/–), and the volume level indicator lights up.
MUTE
Note
The sound output of all input sources (including multi-channel as
well as stereo sources) is muted at the same time.
y
You can select whether the sound output is to be muted
completely or by 20 dB when you press MUTE (see page 78).
Playback
CH TV VOL
TV MUTE
CODE SET
Flashes
VOLUME
or
Lights up
47
En