Adjusting The Picture - Pioneer MVH-AV290BTL Manuel Du Propriétaire

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

System settings
2 Touch [Dimmer Settings].
3 Touch [Day/Night] to switch the following
items.
Day (default):
Turns the dimmer manually to off.
Night:
Turns the dimmer manually to on.
Setting the dimmer duration
optional
You can adjust the time that the dimmer is turned on or off.
p You can use this function when "Dimmer Trigger" is set to
"Time".
p This setting is available only when you stop your vehicle in a
safe place and apply the parking brake.
1 Display the "System" setting screen.
 Displaying the "System" setting screen on page 20
2 Touch [Dimmer Settings].
3 Touch [Dimmer Duration].
The "Duration Setting" screen appears.
4 Touch the time display to activate the adjust-
ment mode.
5 Touch the graph to set the dimmer duration.
 You can also set the dimmer duration touching
or
.
Each touch of
or
moves the cursor back-
ward or forward in the 15 minute width.
 The default setting is 18:00-6:00 (6:00 PM-6:00
AM).
 When the cursors are placed on the same point,
the dimmer available time is 0 hours.
 When the cursor for off time setting is placed on
the left end and the cursor for on time setting is
placed on the right end, the dimmer available
time is 0 hours.
 When the cursor for on time setting is placed on
the left end and the cursor for off time setting is
placed on the right end, the dimmer available
time is 24 hours.
22
 The time display of the dimmer duration adjusting
bar is depending on the clock display setting.
 Setting the time and date on page 25

Adjusting the picture

You can adjust the picture for each source and rear view camera.
CAUTION
For safety reasons, you cannot use some of these functions
while your vehicle is in motion. To enable these functions, you
must stop in a safe place and apply the parking brake. Refer
to Important Information for the User (a separate manual).
1 Display the screen you wish to adjust.
2 Display the "System" setting screen.
 Displaying the "System" setting screen on page 20
3 Touch [Picture Adjustment].
4 Touch the item to select the function to be
adjusted.
Brightness:
Adjusts the black intensity. (–24 to +24)
Contrast:
Adjusts the contrast. (–24 to +24)
Color:
Adjusts the color saturation. (–24 to +24)
Hue:
Adjusts the tone of color (which color is emphasized, red or
green). (–24 to +24)
Dimmer:
Adjusts the brightness of the display. (+1 to +48)
 With some pictures, you cannot adjust Hue and
Color.
 When you touch [Rear View], the mode changes
to the picture adjustment for rear view. By touch-
ing [Source], you can return to the picture adjust-
ment for AV source.
5 Touch
,
,
,
to adjust.
 The adjustments of "Brightness", "Contrast"
and "Dimmer" are stored separately when your
vehicle's headlights are off (daytime) and on
(nighttime).
 "Brightness" and "Contrast" are switched auto-
matically depending on whether the vehicle's
headlights are on or off.
 "Dimmer" can be changed the setting or the time
to switch it to on or off.
 Setting the dimmer on page 21
 The setting contents can be memorized
separately.

Publicité

Table des Matières
loading

Table des Matières