Getting Started; Unpacking; Hookup Overview; Before You Get Started - Sony TA-F5000 Mode D'emploi

Getting Started

Unpacking

Check that you have received the following supplied
items:
• Shorting plugs* (2)
• Mains lead (1)
* plugged into the PHONO jacks when shipped from
the factory
GB
4

Hookup Overview

The amplifier allows you to connect and control the
following audio components. Follow the hookup
procedure indicated for each component that you want
to connect.
To learn the location and name of each jack, see "Front
and Rear Panel Descriptions" on page 12.
Tape deck
MD deck CD player
S
MD TAPE AUX CD
INPUT SELECTOR BASS TREBLE
POWER
–10 +10 –10
Active speaker
Speaker (L)
etc.

Before you get started

• Turn off the power to all components before making
any connections.
• Do not connect the mains leads of the various
components until all connections are completed.
• Use the audio connecting cords supplied with each
component for hooking up with the amplifier.
Purchase and use optionally available cords as
required.
• Be sure to make connections firmly to prevent hum
and noise.
• When connecting an audio connecting cord, be sure
to match the R (right) and L (left) jacks on the
amplifier to the R and L jacks on the other
components.
Tuner
Turntable
TUNER MM - PHONO - MC
BALANCE VOLUME
5
4 6
PHONES
3 7
2 8
1 9
+10 LEFT RIGHT 0 10
Speaker (R)