Intermatic Grasslin B15 Notice D'utilisation page 99

7. If astro correction is activated, select the desired setting and confirm with
8. Select the specification of the desired astro correction setting (Ä Chapter „Programming an ON
command" on page 96) and confirm with
9. Set the day(s) of the week (⋀/⋁) on which the switching time should apply, and confirm with
The days of the week 1 – 5, 6 – 7 and 1 – 7 are set by default. Individual days of the week
can be set (+/-) under menu item "Select days".
10. Select channel (+/-) for which the switching time is to be set, and confirm with
The channel selection is only displayed if there are two or more channels.
+ Active channel
– Inactive channel
11. To create a new switching time, select
12. Adopt the automatically suggested priority and confirm with
You can only select a priority in advanced mode (Ä Chapter „Prioritising programmes" on
page 95).
.
OK
and confirm with
YES OK
OK
.
OK
.
OK
.
or adjust the priority.
EN
.
OK
99