Selecting The Mode - Intermatic Grasslin B15 Notice D'utilisation

Selecting the mode

In the menu, you specify whether the standard functions or the advanced functions are available.
Mode
Menu
Config
Mode
Fig. 17: Selecting the mode
1. Press the
Menu
2. Select
Config
3. Select
Mode
4. Select the desired setting (Ä „Possible settings" on page 82) and confirm with
Possible settings
Standard
• ON/OFF command
OK
OK
OK
Mode
*Standard
button.
and confirm with .
OK
and confirm with .
OK
Advanced
• ON/OFF command
• Programme prioritisation (Ä Chapter „Prioritising
programmes" on page 95)
• Sunrise and sunset-specific programming
• Pulse programming (Ä Chapter „Programming pulse
switching" on page 100)
• Cycle programming (Ä Chapter „Programming cycle
switching" on page 102)
• Random programming (Ä Chapter „Programming
random switching" on page 105)
.
OK
82
EN