Creating A New Switching Programme; Programming An On Command - Intermatic Grasslin B15 Notice D'utilisation

Creating a new switching programme

PROGRAMMING AN
Menu
OK
Program
New
With Date?
Yes/No
Fig. 29: Programming command ON
1. Press the
Menu
2. Select
Program
3. Select
New
The number of available programme memory slots is displayed briefly (PXXX).
ð
The number of available switching programme memory slots is displayed briefly (dXXX).
4. In menu item
date (Ä Chapter „Date-dependent/date-independent programming" on page 93).
5. Select function
6. Enter the hours and minutes for the switch-on time (+/-) and confirm with
Variant-dependent: Instead of hours and minutes, you can also select sunrise (
sunset (
minutes.
COMMAND
ON
Select FNC
ON
OK
Time
09:01
Hour
OK
button.
and confirm with
OK
and confirm with .
OK
, specify whether the switching programme is to be programmed with a
With Date?
and confirm with
ON OK
). Sunrise and sunset is displayed as an additional alternative to the hours and
Sunset
OK
OK
OK
Time
9:50
Minutes
OK
Days
12345--
Mon – Fri
.
.
OK
Channels
––
CH1
OK
Add
switching time?
Yes/No
Priority
High
.
OK
Sunrise
EN
OK
) or
96