Safety Definitions; Safety; General Safety Instructions - Husqvarna PG 690 Manuel D'utilisation

®
Bluetooth Low Energy (BLE) module
On approved markets the product has a BLE module
that is connected with the Husqvarna Fleet Services
system. The BLE module collects and transmits product
data that is used in the Husqvarna Fleet Services
system. Data such as operation time, servicing intervals
and location of the product.
To setup embedded connectivity
1. Set up an account for the Husqvarna Fleet
™
Services system at the web site https://
fleetservices.husqvarna.com/signup.
2. Download the Husqvarna Fleet Services
mobile device.
3. Connect the product to a power source to put the
BLE module in operation.
4. Add the product to your account. Use the Husqvarna
™
Fleet Services app.
5. Obey the instructions in the Husqvarna Fleet
™
Services app.
Note: The Fleet enabled mobile device must be near the
product to connect.
®
Note: The Bluetooth radio transmission enables on the
first connection to the power source, and stays on after
that.
WARNING: High voltage. There are
unprotected parts in the power unit. Always

Safety definitions

Warnings, cautions and notes are used to point out
specially important parts of the manual.
WARNING: Used if there is a risk of injury or
death for the operator or bystanders if the
instructions in the manual are not obeyed.
CAUTION: Used if there is a risk of damage
to the product, other materials or the
adjacent area if the instructions in the
manual are not obeyed.
Note: Used to give more information that is necessary in
a given situation.
1163 - 004 - 01.10.2020
™
To put the product into flight mode
™
When the product is in flight mode, the BLE module
stops to transmit product data.
• Push the battery pack switch to the OFF position.
™
app on a

Safety

General safety instructions

• This product is a dangerous tool if you are not
careful or if you use the product incorrectly. This
product can cause serious injury or death to the
operator or others. Before you use the product, you
must read and understand the contents of this
operator's manual.
• Save all warnings and instructions.
• Comply with all applicable laws and regulations.
• The operator and the employer of the operator must
know and prevent the risks during operation of the
product.
• Do not let a person operate the product unless they
read and understand the contents of the operator's
manual.
disconnect the power plug before you open
the door to the electrical box.
WARNING: Read the warning instructions
that follow before you use the product.
9