Before beginning installation
First decide which functioning version is better for you.
If you decide to use the hood in exhausting version we suggest to
position the upper section of the chimney so that the oulet slots are not
visible once installation has ended, on the contrary if is decided to use
the hood in recycling version BE SURE that the side with slots is up
(see also A-B-C sequence on on Fig. 6).
Fixing the steam separator
Put the steam separator on the body of the hood and fix it with 4
screws + washers. Fig. 7.
A
C - OK!
Fig. 6
Fig. 7
B
180°
63