LORCH M-Pro Performance Manuel D'utilisation page 52

Edit Job-text
 Press key Tiptronic 50.
 Set menu option „edit job text" by turning
operation knob 52.
 Confirm menu option „edit job text" by
pressing operation knob 52.
 Select the job no. where text must be ed-
ited by turning operation knob 52.
 Confirm the job no. by pressing operation
knob 52.
Abb. 27: edit job text
‰ Press key mode 47 to edit numbers.
‰ Press key secondary parameter 46 to edit
letters.
‰ Repress key secondary parameter to
change between capital and small letters.
 Set the required number or letter by turn-
ing operation knob 52.
 Confirm number or letter by pressing op-
eration knob 52.
 Repeat above procedure for each charac-
ter.
‰ Use key Tiptronic 50 to go back stepwise
in order to correct a character.
 Press key secondary parameter 51 to fi-
nalize the saving process.
 Press key 46, 50 or 51 to exit menu and
return to standard display.
- 52 -
Select job
 Press key Tiptronic 50.
 Set menu option „select job" by turning
operation knob 52.
 Confirm menu option „select job" by press-
ing operation knob 52.
9 A listing of all existing jobs will be dis-
played in the menu. The currently selcted
job is marked with a tick (√) on the right
side.
Abb. 28: select job
 Set the required job by turning operation
knob 52.
 Confirm the job by pressing operation
knob 52.
Active job summary
Tiptronic-Jobs can be set either active or in-
active.
When PowerMaster torch is connected and
Tiptronic function is active, use rocker switch
to switch between active jobs.
 Press key Tiptronic 50.
 Select menu option „Active Jobs" by turn-
ing operation knob 52.
 Confirm menu option „Active Jobs" by
pressing operation knob 52.
9 A listing of all existing jobs will be dis-
played in the menu. All active jobs are
marked with a tick (√) on the right side
Start-up
10.13