Unpacking; Stacking Appliances - Aerial AD 740 Série Mode D'emploi

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 48
Do not use any objects to accelerate
the thawing process.
Do not store the dehumidifier in
rooms with permanent sources of
ignition, such as open flames, oper-
ational gas appliances or electric
heaters.
Do not drill open or ignite dehumidi-
fiers.
Only operate the appliance in an ad-
equately ventilated room larger than
4 m
.
2
Any work to the refrigerant circuit
must be performed by the manufac-
turer or the manufacturer's author-
ised technical personnel. Before
working on the refrigerant circuit, it
must be depressurised using the
designated mechanisms.
Observe the national regulations
for gas installations.
Do not dump refrigerants or dispose
of them as household waste.
Avoid coming into contact with the
refrigerant.
WARNING! Electrocution!
Working on live components or water on
live components can cause life-threaten-
ing electrocution.
Avoid contact between water and
live components.
Always switch off and unplug the
dehumidifier and drain away any
water before moving it to another lo-
cation.
Always empty the basin before mov-
ing it to another location.
Only allow the manufacturer or au-
thorised personnel to carry out work
on electric components.
7

Unpacking

Procedure
1.
Check that the package contents
are complete. Contact your stockist
in the event of damage or missing
contents.
2.
Remove the packaging and dis-
pose of it in accordance with local
regulations.
8

Stacking appliances

Two appliances from this series can be
stacked on top of each other for
transport and storage.
Warning! Crushing as a result of tip-
ping or instability!
Do not stack more than two dehu-
midifiers on top of each other. Make
sure that the feet of the top appli-
ance are in the notches of the bot-
tom appliance.
Secure the dehumidifiers to prevent
them from tipping over or falling,
e.g. using tension belts.
Procedure
1.
Place the feet of the top appliance in
the appropriate notches of the bot-
tom appliance.
2.
Attach a suitable safeguard, e.g.
tension belts, to the attachment
points for straps to secure the top
appliance to the bottom appliance
and stop it from falling off. Stack a
maximum of two appliances.
18

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Ad 40 série

Table des Matières