Using The Rice Cooker; Preparing Pretreated Rice - SilverCrest SRK 400 A2 Mode D'emploi

Using the rice cooker

The appliance can be used to cook rice and steam other food at the same time.
Experiment with fi nding the right quantity of water and the right cooking time for
the various foods.
NOTE
Before fi rst using the appliance, fi ll the cooking bowl w up as far as the
►
CUP marking "4", and allow to boil for around 30 min (see chapter enti-
tled "Steam cooking" for operation). Now throw this water away, allow the
appliance to cool down and then clean the cooking bowl w thoroughly.

Preparing pretreated rice

You will fi nd pretreated rice on the retail market under the name "Quick cook
rice", "Easy cook rice" or the like.
NOTE
Coat the inside of the cooking bowl w evenly with a little fat or vegetable
►
oil to achieve a better cooking result.
Never exceed the 5 CUP/1 Litre scale in the cooking bowl w. If you do,
►
the water may overfl ow!
1) Open the lid by pressing the release 2 and lifting the lid simultaneously.
2) Remove the cooking bowl w.
3) Pour the rice and the amount of water specifi ed on the rice packet into the
cooking bowl w.
NOTE
► Always prepare at least enough rice so that the when the water is added it
reaches at least the CUP marking "2". Failure to do so could lead to poor
cooking results!
4) Place the cooking bowl w in the appliance.
Ensure that...
–
–
SRK 400 A2
... there is no moisture or rice on the outside of the cooking bowl w - this
will prevent soiling of the cooking area. If necessary, wipe the outside
with a clean cloth.
... the cooking bowl w is not skewed or tilted when being placed in the
rice cooker housing. Always insert the cooking bowl w correctly and
precisely into the rice cooker housing. Otherwise, the safety shut-off of
the appliance may trigger and the appliance will not allow itself to be
switched on.
GB
IE
7