Airwell IU-MINV-HW-9H Mode D'emploi page 25

Anti-Mold Filter
How to remove the
anti-mold filter
Cleaning
How to replace the
anti-mold filter
OI-757-25EG
Care and Cleaning (continued)
The anti-mold filter behind the air intake grille should be checked and
cleaned at least once every two weeks.
1. Grasp both ends
of the air intake
grille and pull it
out and up.
2. Push the anti-
mold filter up
slightly, and then
pull it down.
Use a vacuum cleaner to remove light dust. If there is sticky dust on the
filter, wash the filter in lukewarm, soapy water, rinse it in clean water, and
dry it.
1. With the "FRONT" mark
facing you, slide the anti-
mold filter up into the unit
and then lower the handle
into the groove on the unit.
2. After installing the anti-mold
filter, press the locations
marked by the arrows (
and close the air intake grille.
Air intake grille
Anti-mold filter
Air intake grille
)
Anti-mold
filter
Insert into the groove on the unit.
25