Connecting Other Equipments - Aiwa XH-A1000 Mode D'emploi

To mount the surround speakers on a wall
Use wall mounting screws (not supplied).
Select a spot that will hold the weight of the speakers and
carefully mount the surround speakers so that they are firmly
secured.
NOTE
• Be sure to connect the speaker
cords correctly. Contact of bare
conductor with other jacks or
other conductors may cause short
circuits in SPEAKERS terminals
or malfunctions.
• Do not leave objects generating magnetism, such as credit
cards, near the speakers, as the objects may be damaged.
• Do not bring the FM antenna near metal objects or curtain rails.
• Do not bring the AM antenna near other optional equipment,
the stereo system itself, the AC cord or speaker cords, since
noise will be picked up.
• Do not unwind the AM antenna wire.
CONNECTING AN OUTDOOR ANTENNA
For better FM reception, use of an outdoor antenna is
recommended.
Connect the outdoor antenna to FM 75 Ω terminals.
CONNECTING OTHER
EQUIPMENTS
A video equipment, the TV set, an LD player, a DVD player or an
MD player, etc. can be connected to this unit.
VIDEO1/DVD/MD jacks
A video equipment, a DVD player, or an MD player, etc. can be
connected to these jacks.
• Use the audio cable and video cable commercially available.
• To input signals from the connected equipment to this unit,
connect the cables to VIDEO1/DVD/MD IN jacks.
To output signals from this unit to the connected equipment,
connect the cables to VIDEO1/DVD/MD OUT jacks.
• Connect L (left) output of the connected equipment and AUDIO
L of this unit, R (right) output and AUDIO R by the audio cable.
6
ENGLISH
Aiwa disclaims any
responsibility for injury to
persons or other accidents
caused by not fitting the
surround speakers properly
or if the place of the
installation is not suitable.
A K E R
S P E
: 6 Ω
IM P
VIDEO2/LD/TV jacks
A video equipment, an LD player or a cable TV, etc. can be
connected to these jacks.
• Use the audio cable and video cable commercially available.
• To input signals from the connected equipment to this unit,
connect the cables to VIDEO2/LD/TV IN jacks.
To output signals from this unit to the connected equipment,
connect the cables to VIDEO2/LD/TV OUT jacks.
• Connect L (left) output of the connected equipment and AUDIO
L of this unit, R (right) output and AUDIO R by the audio cable.
VIDEO3 jacks
A video equipment, a camcorder or a TV game, etc. can be
connected to these jacks. Turn VOLUME to "0" before connecting
equipment to VIDEO 3 jacks.
• Use the audio cable and video cable commercially available.
• Connect L (left) output of the connected equipment and AUDIO IN
L of this unit, R (right) output and AUDIO IN R by the audio cable.
• Connect Video output of the connected equipment and VIDEO
IN of this unit by the video cable.
REC OUT/AUDIO MONITOR jacks
A recording equipment such as an MD recorder, a CD-R/RW recorder
or a cassette deck, or the TV set etc. can be connected to these jacks.
The sounds from the equipment connected to VIDEO1/DVD/MD
or VIDEO2/LD/TV can be recorded or monitored as well.
• Use the audio cable commercially available.
• Connect L (left) output of the connected equipment and AUDIO
L of this unit, R (right) output and AUDIO R by the audio cable.
MONITOR/VIDEO OUT jacks
The TV set, etc. can be connected to these jacks.
The videos from the equipment connected to VIDEO1/DVD/MD
or VIDEO2/LD/TV can be monitored.
• Use the video cable commercially available.
CD DIGITAL OUT (OPTICAL) jack
A digital equipment such as an MD recorder, a DAT deck, a digital
cassette deck or a digital amplifier, etc. can be connected to this
jack. The digital signals from the CD player of this unit are output
to the connected equipment.
• Use the optical cable commercially available.
• Before connecting an optical cable remove the dust cap a
from CD DIGITAL OUT (OPTICAL) jack.
• When CD DIGITAL OUT (OPTICAL) jack is not used, attach
the dust cup a.
PHONO IN jacks
A turntable can be connected to these jacks. Use an Aiwa
turntable equipped with a built-in equalizer amplifier.
AUX IN jacks
A playback equipment such as the TV set or an MD player, etc.
can be connected to these jacks.
• Use the audio cable and video cable commercially available.
• Connect L (left) output of the connected equipment and AUDIO
L of this unit, R (right) output and AUDIO R by the audio cable.
NOTE
The signals input through VIDEO 1 IN jack are output from VIDEO
2 OUT or MONITOR OUT. The signals input through VIDEO 2 IN
jack are output from VIDEO 1 OUT or MONITOR OUT.