AVer M15-13M Mode D'emploi page 5

Compound Key
Press and hold for 3 seconds to operate the compound key function.
Press keys to operate the compound key function.
Power Connection and Charging
 When the camera is power on, the camera is in "Standby" mode. In
standby mode, it can be charging through the USB connection from
other device; but the power supply is required 5V/2A and the charging
time will be longer.
 The laptop, projector, or monitor cannot provide the power through the
USB connection to the camera while the camera is operating.
 When the camera is charging through the wall outlet, the power indicator
is in green flashing.
 Press
camera back to standby mode.
: Display system information.
: Snapshot the current screen image to software or
cloud.
: Back to factory default settings.
: Press to switch between following modes:
- Auto detects the best resolution(4K, 720P, 1080P)
- 1024x768 (If HDMI device support)
- 4K 60Hz (If HDMI device support)
:Press to switch between following modes:
- Normal: Adjust the gradient of image.
- Motion: Increase frame rate. Sufficient lighting is
required when using this mode.
- High quality: Better image quality.
+ when the camera doesn't work properly. The
English-3