Fault Indication - REMEHA iSense Notice D'utilisation

Faultcode - F227
Display text
Solution

Fault indication

Display text
Solution
Fault indication
Display text
Solution
Fault indication
Display text
Solution
Wait for RF sensor information
Wait for RF sensor information. This may take 15 mins.
This fault code may appear after the controller RF is restarted, e.g.
after changing the battery. As soon as the controller RF has received a
message from the connected RF sensors, the message will disappear. If
the RF sensors fail to report, another fault code will be displayed after 15
minutes.
Water pressure too low
The water pressure in your central heating system is too low. Top up
water to the required fill pressure.
Top up the water in the central heating system (see the documentation
for your boiler).
E-code: Boiler failure
Boiler fault: Consult the fault list in the boiler user manual.
Use the E-code to find the fault in the appliances to be controlled, e.g.
boiler, cascade controller or c-Mix.
Controller batteries flat
-
The batteries are almost empty. Replace the three AA batteries.
and are lit up.
is lit up.
and are lit up.
EN
44