Temporarily Changing The Temperature; Fireplace Mode - REMEHA iSense Notice D'utilisation

quickly).

6.2 Temporarily changing the temperature

You can (temporarily) switch off a selected clock program or continuous program at any time by
setting the temperature manually.
1. Turn button C from the main display to set a new temperature.
2. Press Adjust time if you also want to set an end time for the manually-selected temperature,
and select this time using push-turn button C.
If you do not select an end time and a clock program was active, that clock program will become
i
active again at the next switch point. Manual operation will then be switched off.
3. Press Duration if you also want to set an end date for the manually selected temperature, and
select this time using push-turn button C.
4. Press button C to return to the main menu or wait five seconds until the controller automatically
returns to the main menu.
Press the Continue program button to cancel the manual temperature change.

6.3 Fireplace mode

Once the temperature has reached the desired level in the room where the controller has been
positioned, the central heating switches off. This may be inconvenient if, for example, you have an
open fire or if a lot of people are present in that room. Other rooms in the house are also no longer
heated in this situation.
You can switch on the Fireplace mode via the Program button so that the other rooms are still
EN
40