Creating Or Changing A Clock Program - REMEHA iSense Notice D'utilisation

This manual deals with most functions relating to the Normal mode.
i
This is the default mode after initial start-up.

5.2 Creating or changing a clock program

A clock program automatically controls the temperature for a day, and can be set for each individual
day. You can adjust the default clock program or enter a completely new program.
The controller starts pre-heating prior to the set time by default, so that the room has reached
i
the desired temperature at the correct time.
Making an overview
It is useful to draw up your own overview with switch times: what temperature does it need to be and
when in your home? This of course depends on who is at home when, what time you get up etc.
You can set up to six switch times per day.
Creating a new clock program
1. Select Menu > Program > Clock prog. > New.
2. Select an initial program if appropriate (Home at weekend, Home mid-week or Home all day).
You can now create your own clock program based on this program.
Press button C to confirm.
3. Go to the day for which you want to set the clock program.
Press button C to confirm.
4. Go to the time you want to set.
Press button C to confirm.
EN
33