Installation And Connection - REMEHA iSense Notice D'utilisation

Controller RF
• Position the controller at least 1 metre from equipment with electromagnetic emissions such as
washing machines, Tumble driers, wireless telephones, TVs, computers, microwave ovens, etc.
• Position the controller so that it has good reception. Take account of the fact that objects
containing metal will affect the reception. These include steel-reinforced concrete, mirrors and
windows with a metal coating, insulating films etc.
The range of the controller RF in buildings is generally 30 metres.
Note!
This value is purely an indication. The actual range of the RF signal depends strongly on the local
environment. Remember that the number of walls and ceilings (metal or otherwise) can have a
(considerable) impact on reception. Other objects that contain metal may also impact reception.
These include mirrors and windows with a metal coating, insulating films etc.
The signal strength can be viewed via Menu > Information.
i

3.2 Installation and connection

The following must be done before you install and connect the controller:
• Adjust the boiler so that it can be connected to a controller OpenTherm.
• Turn off the boiler.
Consult the boiler documentation for this process.
OpenTherm is polarity insensitive; you may therefore swap the wires.
EN
29