Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
AURORA
•
Connect the power plug to the power socket making sure
the voltage is as specified on the appliance rating plate.
•
Place food to be sliced on the sliding cut surface (6) and
push it against the cut thickness adjustment plate (9) using
the pusher (7). (Fig. G)
•
To start the blade (3) rotation, press the unlocking button
(11) first and the switching on button (10) immediately af-
ter. The blade rotates until when both buttons are pressed.
(Fig. H)
When even only one of the two buttons is released, the blade stops.
•
While keeping both buttons pressed, perform alternate back and forth movements
to slice food, pushing it against the blade only during cut phase. (Fig. I)
•
Adjust if necessary the cutting thickness.
Before carrying out the cleaning
operation, ALWAYS disconnect the
plug from the socket.
For an accurate cleaning:
Rotate the dial (12) to "0". (Fig. M)
•
•
Remove the food pusher (7) and the sliding carriage (6) (together with the finger
guard "8"). (Fig. N)
•
Use a wet cloth avoiding the use of abrasive cleansers to clean the motor body (2),
the releasable surface (5) and the adjustment plate (9).
Never immerse the motor unit (2) in water or other liquids.
Never perform the cleaning of the moving blade.
The blade is very sharp, manipulate it carefully.
USE
CLEANING
EN
230V~ 50Hz
45
Publicité
Table des Matières
