Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
EN
APPLIANCE DESCRIPTION (Fig.A)
1) Feet
2) Motor body
3) Blade
4) Blade hooking/releasing screw
5) Releasable surface
6) Sliding carriage
7) Food presser
8) Finger protection
9) Cut thickness adjustment plate
REMOVAL/INSTALLATION OF COMPONENTS
The blade is very sharp, manipulate it carefully.
Before installing or removing the blade from the apparatus,
disconnect the plug from the socket.
•
Position the slicer on a work surface.
•
Completely open the releasable surface (5) from the motor body (2) making sure all
the feet (1) lean on the work surface correctly. (Fig. B)
Make sure the work surface is levelled and stable.
Assemble the finger guard (8) on the sliding carriage (6). (Fig. C)
•
Push the finger guard (8) downwards until you hear the hooking "click". (Fig. C)
•
Position the sliding carriage (6) on the releasable surface (5). (Fig. D)
•
Position the food pusher (7) on the finger guard (8). (Fig. E)
•
•
The slicer is ready for use.
With the included blade can slice foods such as bread, meats, cheese, hams,
vegetables, etc.
Do not cut frozen food.
Adjust the cutting thickness, turning the knob (12). (Fig. F)
•
•
The cutting thickness is adjustable from 0 to 20mm.
44
Commands
10) Switching on/off button
11) Switching on unlocking button
12) Cutting thickness control knob
- - - - - - - - - - - - - - - -
13) Rating label
AURORA
Publicité
Table des Matières
