Miele STB 201 Mode D'emploi page 67

Features of the Turbobrush
The Turbobrush is driven by the suction
power of the vacuum cleaner. The
brush roll rotation increases the intake
of threads, hair and lint. Four wheels
keep the turbobrush 1/16" (1.5 mm)
from the floor.
Operation
The Turbobrush is intended for clea-
ning short-to-medium pile carpeting.
Read these Operating Instructions
carefully and completely before
using this appliance. Failure to do so
can result in property damage or
personal injury to you or others.
– Uneven surfaces should not be va-
cuumed with the Turbobrush. The
brush could come into contact with
the floor and cause damage.
– Please consult the carpet manufactu-
rer before vacuuming carpets such
as: saxony with very long-pile, berber
and sheepskin rugs, and valuable
hand-knotted carpets, e.g. Persian
and similar. There is a danger of the
threads being pulled out.
en U - Operation
Using the Turbobrush
^ To achieve the best results, slowly
pass the Turbobrush back and forth
over the carpet or flooring.
For carpets with fringes, always draw
the Turbobrush from the carpet across
the fringe towards the rest of the floor.
67