House Wiring Box Connection - Faber HILTIS36WHNB Instructions D'installation

HOUSE WIRING BOX CONNECTION

14
A
B
C
D
A. Home power supply cable.
B. Black wires.
C. UL listed wire connectors.
D. White wires.
E. Green (or bare) ground wire from home power supply to be connected to green ground screw.
F. Range hood power supply cable.
15
Replace the grease filters.
28
Wiring House Power to the Hood
F
1
2
E
16
Close the filter cover panel.
Installation Of House Power
Wiring Box Connection 1
1. Remove the cover from the
field wiring compartment. DO
NOT turn on the power until
installation is complete!
2. Connect the Power Supply
Cable to the Range Hood.
3. Connect the Green (Green
and Yellow) ground wire
under the Green grounding
screw.
4. Attach the White lead of the
power supply to the White
lead of the Range Hood
with a twist-on type wire
connector.
5. Attach the Black lead of the
power supply to the Black
lead of the Range Hood
with a twist-on type wire
connector.
6. Replace the Wiring Box 1
cover and the grease filters.
7. Check the Wiring Diagram.