Symbols On The Product - Jonsered LM2146M Li58-52 Manuel D'utilisation

INTRODUCTION............................................................ 6
SAFETY..........................................................................7
ASSEMBLY....................................................................9
OPERATION................................................................ 10
Operator's manual
The initial language of this operator's manual is English.
Operator's manuals in other languages are translations
from English.
Overview
(Fig. 1)
1. Operator presence control bar
2. State of charge lights
3. Key
4. Electric powerhead
5. Cutting height lever
6. Battery charger
7. Operator's manual
8. User control interface
9. Battery pack
10. Battery cover
11. Power button
12. Cutting mode button

Symbols on the product

(Fig. 2) Warning
(Fig. 3) Read this manual
(Fig. 4) Please read the operator's manual carefully
and make sure that you understand the
instructions before use.
(Fig. 5) Use approved eye protection
(Fig. 5) Use approved hearing protection
(Fig. 5) Use approved head protection
(Fig. 6) Use approved hearing protection
(Fig. 7) Warning: rotating blade. Keep hands and
feet clear.
(Fig. 8) Keep hands and feet away from rotating
blades. Do not open or remove the
protective shields while the engine or motor
runs.
6
Contents
MAINTENANCE........................................................... 11
TRANSPORTATION AND STORAGE.........................13
TECHNICAL DATA...................................................... 13
CONTENTS OF THE EC DECLARATION OF
CONFORMITY..............................................................14
INTRODUCTION
(Fig. 9)
(Fig. 10)
(Fig. 11)
(Fig. 12)
(Fig. 13)
(Fig. 14)
(Fig. 15)
(Fig. 16)
(Fig. 17)
(Fig. 18)
(Fig. 19)
(Fig. 20)
(Fig. 21)
(Fig. 22)
(Fig. 23)
(Fig. 24)
(Fig. 25)
Before and while walking rearward, look
behind and down for small children, animals
or other risks that can cause you to fall.
Look out for thrown objects and ricochets.
Keep persons and animals at a safe
distance from the work area.
Slope hazard
Electrical shock
Remove the key before repair, adjustment,
set-up or transport.
Power button
Motor on
Motor control handle engaged
Motor off
Motor control handle disengaged
The product or packaging cannot be
handled as domestic waste. The product
and packaging must be submitted to an
appropriate recycling station for the recovery
of electrical and electronic equipment.
Do not leave, store or use in the rain or in
wet conditions.
Recycle
Sound power level
The product agrees with the applicable EC
Directives
This product agrees with the applicable EAC
directives
853 - 002 - 18.10.2018