Time Format - Dörr SnapShot Mini 12 MP HD Notice D'utilisation

Timer 1 Stop
Timer 2 Start
Timer 2 Stop
TEMPERATURE Determine the indication of temperature on the image.
Press the arrow buttons (10) or to select between Celsius or Fahrenheit.
To save your settings press the OK button (11).
located inside the camera housing. Especially when taking test pictures, the body temperature may a ect the indication
of the correct temperature.
Set the actual date.
DATE
Press the arrow buttons (10) or to select the day.
Press the arrow button (10)
Press the arrow button (10)
To save your settings press the OK button (11).
Set the actual time.
TIME
Press the arrow buttons (10) or to select the hour.
Press the arrow button (10)
To save your settings press the OK button (11).

TIME FORMAT

Select the desired time format.
Press the arrow buttons (10) or to select between 24h (Europe) or 12h (USA).
To save your settings press the OK button (11).
Give a name to the camera, it will be displayed on the pictures. Useful feature, when you use various cameras at
CAM NAME
various locations.
Press the arrow buttons (10) or to select letters and numbers.
Press the arrow button (10)
To save your settings press the OK button (11).
Secure the camera with password, to avoid misuse. The password is needed every time the camera is switched on. De-
PASSWORD
fault password is 0000. With the arrow buttons (10)
the default password. The individual numbers can be changed with the arrow keys (10). To save your new password
press the "OK" button (11). The next time the camera will be switched on, the password will be requested. Note your
password carefully, without the password the camera cannot be operated.
Determine the TV output format. This setting is required if you wish to connect the camera to a USB compatible
TV OUT
TV set. In this case, connect the supplied USB cable with the Mini USB port of the camera (15) and the TV set.
Press the arrow buttons (10) or to select between PAL or NTSC.
To save your settings press the OK button (11).
To know the signal your TV supports (PAL or NTSC) please refer to the instruction manual of your TV set.
Determine stop of activity for 1st time frame.
Press the arrow buttons (10) or to select the hours.
Press the arrow button (10)
the minutes.
e.g. 23.10 Timer stops at 23:10 o'clock.
To save your settings press the OK button (11).
Determine start of activity for 2nd time frame (proceed as described above Timer 1 Start).
Determine stop of activity for 2nd time frame (proceed as described above Timer 1 Stop).
Now the camera only works in the selected time frames.
The temperature shown on the image may vary from the real outdoor temperature, since the temperature sensor is
to switch to month. Press the arrow buttons (10) or to select the month.
to switch to year. Press the arrow buttons (10) or to select the year.
to switch to minutes. Press the arrow buttons (10) or to select the minutes.
to switch to next edit fi eld.
to switch to minutes. Press the arrow buttons (10)
and select "On" or „O ". Press the "OK" button (11) to display
19
or to select