Time Stamp - Dörr SNAPSHOT LIMITED BLACK 8MP TFT Notice D'utilisation

08.4 Timer (Start-Stop)
The camera only takes photos/videos within the selected time frame. In the remaining time camera does not take photos/videos
and does not react to motion (same for "Time lapse" mode).
Press the navigation button (10)  to select Start-Stop.
1.
Press the navigation button (10)  or  to select Off or On.
2.
3. To deactivate select Off and confirm with OK button (11).
To activate select On and confirm with OK button (11). Display shows two fields to enter the start and stop time:
4.
With the navigation buttons (10)  or  enter the start time.
-
With the navigation button (10)  switch to the Stop field. With the navigation buttons (10)  or  enter the stop time.
-
5. After setting save with OK button (11). Now the camera only works in the selected time frame.
09 | SYSTEM SETTINGS SYS
09.1 Date and time
The date has to be set in the format dd.mm.yyyy. Time has to be set in 24 hours format.
Press the navigation button (10)  to select Enter. Press the OK button (11) to enter the setting mode:
1.
With the navigation buttons (10)  or  enter the date.
-
With the navigation button (10)  switch to the next number.
-
2. After setting save with OK button (11).

09.2 Time stamp

Choose if time and date are shown on each picture.
1. Press the navigation button (10)  to select Time Stamp.
2. Press the navigation buttons (10)  or  to select On or Off.
3. Save with OK button (11).
09.3 Password
Secure the camera with password, to avoid misuse. The password is needed every time the camera is switched on. Default
password is 0000.
With the navigation buttons (10)  or  select On or Off.
1.
2. Press the OK button (11) to display the default password.
The individual numbers can be changed with the navigation keys (10)  or .
3.
To save your new password press the OK button (11). The next time the camera will be switched on, the password will be
4.
requested.
Note your password carefully, without the password the camera cannot be operated.
09.4 Language
Choose either German, English or French language for the camera menu.
Press the navigation button (10)  to select Language.
1.
Press the navigation buttons (10)  or  to select English, German or French.
2.
3. Save with OK button (11).
19 doerr-outdoor.de