First Steps; Inserting The Batteries - Dörr SNAPSHOT LIMITED BLACK 8MP TFT Notice D'utilisation

04 | NOMENCLATURE
01 Infrared LEDs
02 LED indicator/light sensor
03 Motion detector (PIR sensor)
04 Camera lens
05 Tension lock
06 Eyelet for U-lock (lock optional)
07 LCD camera display
08 Slide control (ON/Setup/OFF)
09 MENU button
10 Navigation buttons
11 OK button
12 Battery compartment
13 Connection external battery
14 Mini USB port
15 SD card slot
16 ¼" thread mount
17 Eyelet for cable lock (lock optional)
18 Eyelets for mounting strap
19 Mounting strap
20 USB data cable

05 | FIRST STEPS

CAUTION
To avoid camera damages, make sure that camera is switched off (slide control 08 = OFF) for the following steps!

05.1 Inserting the batteries

CAUTION
Make sure to use only fresh Mignon AA LR6 1.5V Alkaline Manganese batteries of the same type and brand. When inserting the
batteries please respect the correct polarity (+/-). Please remove batteries when device is not in use for a longer period.
Do not use rechargeable batteries. They may lead to malfunction.
Open the camera releasing the lateral tension locks (05). Make sure that the slide control (08) is on position OFF. Insert 8 AA 1,5V
batteries (optional) into the battery compartment (12). Respect correct polarity (+/-).
16 doerr-outdoor.de