Location; Room Temperature; General Considerations - Red Sea REEFER Serie Mode D'emploi

2 Location

The first step in setting up the REEFER
Weight
The flooring directly below the system must be rated to support the
following weight:
Approximate total weight of system including water
Model Nano 170 200
Weight
180kg/ 270kg/ 315kg/
400lb 595lb 695lb
Model XL 425 XL 525 XXL 625 XXL 750
Weight 670kg/ 830kg/ 930kg/
1480lb 1840lb 2060lb

Room temperature

Site selection is important for correct temperature maintenance.
We recommended that you keep the ambient room temperature a
comfortable and stable 22°C / 72°F. Avoid placing the tank in front of
an air conditioner, heating vents or direct sunlight. A well ventilated
room with moderate light is the best place to position the aquarium.
™ is to choose a suitable location.
250 300 350
375kg/ 470kg/ 530kg/
830lb 1035lb 1170lb
3XL 900 P 500
1110kg/ 1300kg/ 760kg/
2460lb 2870lb 1680lb
Accessibility
Ensure that there is at least 10cm / 4" of clearance behind the
™
REEFER to allow easy access for installing/removing cables
from the sump as well as sufficient air circulation for a chiller
(larger models only). It is recommended to leave approximately
60cm/24" between one of the sides of the aquarium and any
450 adjacent walls or furniture for access to the rear of the tank.
680kg/

General considerations

1500lb
Ensure that the area surrounding the aquarium is waterproof and
consider moving away anything that water might damage or may be
P 650
corroded by the salt.
940kg/
2080lb
™
NOTE: The REEEFER system should not be moved when full of water.
ENG
5