Setting The Timer Manually - Aiwa HV-FX8100U Mode D'emploi

Setting the timer manually

If you cannot use VCR PLUS+ system, you can set the timer
manually.
You can set up to 8 programs within one month of the
current date.
CANCEL
ENTER
MENU
Before starting
• Check that the clock is set correctly.
• Insert a cassette with its erasure prevention tab in place.
• Set the VCR/CATV/TV selector to VCR.
• If the CATV converter is used for the timer recording,
check that the CATV converter is turned on and the
channel you want to record is selected.
1
Press MENU.
2
Press SET/TRACKING + or – to select TIMER
REC SET, then press ENTER.
M E N U
T I M E R R E C S E T
C H S E T U P
V C R S E T U P
S Y S T E M S E T U P
N O N O I S E B AC K G RO U N D
3
Press SET/TRACKING + or – to select the line
on which no program has been set, then press
ENTER.
DATE START END
VCR/CATV/TV
T-REC
SET/TRACKING
+/–
s STOP
ON OFF
CH
4
Press SET/TRACKING + or – to set the date,
then press ENTER.
If you want to set daily/weekly recordings, see " To set
the daily/weekly timer" below.
5
Set the start time (hours and minutes), the end
time (hours and minutes), the channel number
and the tape speed in the same way as in step 4.
• To change the minutes setting in ten minute intervals,
press and hold SET/TRACKING + or –.
• The timer program list appears.
6
If you want to set another program, repeat
steps 3 through 5.
7
Press MENU twice to return to the normal
screen.
8
Press T-REC.
• " " appears in the display window, and the VCR
stands by for timer recording.
• If the " " does not appear, a cassette has not been
inserted.
• The cassette is ejected if the cassette's erasure
prevention tab has been removed.
• The VCR automatically starts recording at the
programmed time.
• When you press the POWER button instead of the
T-REC button, the VCR does not stand by for timer
recording.
To set the daily/weekly timer
In step 4, press SET/TRACKING – repeatedly before
pressing ENTER.
The setting changes as follows:
Example
The current day (Sunday)
One month later
minus two days
One month later
minus one days
WKL-SUN (Every Sunday)
Press SET/TRACKING + to change the display in reverse
order.
After setting, press ENTER.
To correct the data while setting
Press CANCEL until the item you want to correct becomes
lit, then press SET/TRACKING + or – to set the correct data.
SUN-SAT (Sunday to Saturday)
MON-SAT (Monday to Saturday)
MON-FRI (Monday to Friday)
WKL-SAT (Every Saturday)
WKL-FRI (Every Friday)
.....
CONTINUE
24
ENGLISH