Basic Connections - Aiwa HV-FX8100U Mode D'emploi

2
Connecting Antenna (or CATV)-VCR-TV

Basic connections

1
Connect the TV antenna
cable (not supplied) to the
VCR.
AC outlet
4
Connect the AC cord to
the AC outlet.
Important
Connect the AC cord to the AC outlet after all of the connections are complete.
When the TV is connected to the UHF/VHF OUT (TV) connector using an antenna cable
Set the channel selector to 3CH or 4CH, not employed for broadcasts, and select the same channel on the TV.
2
Connect the supplied antenna
cable to the UHF/VHF OUT TO
TV connector on the VCR and
the antenna connector on the
TV.
Antenna connector
To select a desired TV channel on the TV
Turn the TV and VCR on, and press TV/VCR to turn off
OUT VCR in the display window, or turn off this VCR.
VIDEO
L
AUDIO
R
3CH 4CH
2
TV
UHF/VHF
IN (ANT)
OUT
VIDEO
L
OUT (TV)
AUDIO
R
3
If your TV has audio/video
input jacks, connect the VCR
and TV using the supplied
audio/video cables.
Audio/video
input jacks