Additional Functions - Aiwa HV-FX8100U Mode D'emploi

Playing back a tape (continued)

Additional functions

SET/TRACKING
+/–
fREW/[
To
Press
Make a picture
a PAUSE/STILL
during playback
still
Fast-forward the
g F FWD/]
during stop
tape
Rewind the tape
f REW/[
during stop
Eject the
z EJECT on the
remote control or
cassette
Z STOP/EJECT
on the unit during
stop
Search forward
g F FWD/]
once during playback
at low speed
Search forward
g F FWD/]
at a higher
twice during playback
speed
Search reverse f REW/[
once during playback
at low speed
Search reverse f REW/[
twice during playback
at a higher
speed
SLOW during
Play at slow
playback
speed
17
ENGLISH
zEJECT
cPLAY
gF FWD/]
aPAUSE/STILL
AD-SKIP
SLOW +/–
TV MONITOR
gF FWD/]
cPLAY
aPAUSE/STILL
fREW/[
ZSTOP/EJECT
To return to the
original mode
Press a PAUSE/
STILL or c PLAY.
Press s STOP on
the remote control or
ZSTOP/EJECT
on the unit.
Press s STOP on
the remote control or
ZSTOP/EJECT
on the unit.
—
Press c PLAY.
Press c PLAY.
Press c PLAY.
Press c PLAY.
Press c PLAY
or SLOW.
To watch a picture of the tape during fast-
forward or rewind — Skip Search
Hold down g F FWD/] or f REW/[ during fast-
forward or rewind. The VCR switches to forward or reverse
search. Release the button to return to the fast-forward or
rewind mode.
To skip an advertisement
Press AD-SKIP during playback. The VCR searches
through approximately 30 seconds of the recorded time.
Each press changes the recorded time of forward search in
30 seconds increments to a maximum of 3 minutes.
CUE1 to CUE6 appears in the display window.
After forward search, VCR returns to the normal playback.
To change the speed of playback to a
slower speed
If the SLOW button is pressed, the VCR will begin playback
at a reduced speed, / of the normal speed.
1 10
During slow speed playback, press the SLOW + or – buttons
in order to change this reduced speed.
+: If pressed repeatedly, the slow speed will return to
the normal speed.
–: If pressed repeatedly, the slow speed will be reduced
further, up to / of the normal speed.
1 30
To cancel this function, press SLOW or c PLAY.
To monitor a TV program
Press TV MONITOR during playback. The cassette
continues to play while the picture switches to TV channel.
Press TV MONITOR again to return to playback picture.
Tips
• If you press z EJECT on the remote control or Z STOP/
EJECT on the unit while the power is off, the VCR ejects the
cassette and turns the power off.
• You can adjust unstable pictures by pressing the SET/
TRACKING + or – button repeatedly during still.
• Noise lines may appear or color may fade during forward or
reverse searches. You can move the noise lines by pressing
the SET/TRACKING + or – button repeatedly.
• Depending on the tape, noise lines may appear or color may
fade during slow motion playback, and still. You can move
the noise lines during forward and reverse searches by
pressing the SET/TRACKING + or – button repeatedly.
Notes
• If still, forward, reverse search and slow motion playback last
for more than 5 minutes, the VCR will automatically enter
playback mode to protect the tape.
• The sound will be muted during forward and reverse
searches, still and slow playback.
/ of
1 5