Drain Connections - Haier HWD1600BW Guide De L'utilisateur

Drain ConnECtion
• The height of the standpipe drain or sink rim for the drain hose should be between
2'6" and 3'3".
• Use the supplied Drain Hose Support Bracket to loop the drain hose down into the
wall, standpipe or laundry tub.
• The drain hose shakes as water is being pumped out of the washer. Make sure that
the end of the drain hose is secured to the drain or sink. The support bracket has a
mounting hole to assist you in doing this.
• Take care to ensure all hose connections are tight.
The end of the drain hose cannot be immersed in water for the washer to work
properly.
Warning
11