Memory Function - Beurer HS 80 Mode D'emploi

Select the ion intensity
> The intensity of the ions can be selected using the ion button [3]:
> Select the ion intensity:
0 No ions for particularly thin hair
1 Low level of ions for fine hair
2 High level of ions for relatively thick and frizzy hair
> Dry your hair completely before using the straightener.
> Your hair should be clean and free of styling products. Exceptions to this are
special products that aid straightening of the hair.
> Comb your hair with a wide-toothed comb to untangle it.
> Divide your hair into individual strands with a width of about 3 to 4 cm. Hold the
strands taut and place them between the heating plates [1] at the roots.
> Move the straightener slowly and smoothly from the roots to the ends. Do not
keep the straightener at any one place for longer than two seconds. This way you
will obtain the best results without overstraining or damaging your hair.
> You can shape the ends by twisting the straightener either outward or inward
before you pull it out over the ends.
Note
• The higher the selected temperature, the more quickly you get the desired result.
• If you work with the maximum temperature, do not work on the same strands
more than once.
Select function
The hair straightener has 2 functions:
Function
Protect
function
Memory
function
Description
For gently straightening hair. The temperature is restricted to
approx. 160°C and kept constant; the ions are set at level 1
[button 4].
It is used for storing the preferred, individually selected tempe-
rature setting. The hair straightener automatically stores the last
temperature set.
18