Stopping Program Playback; Clearing Programmed Track - Yamaha CD-S700 Mode D'emploi

PROGRAM PLAY

Stopping program playback

Press s.
To restart program play, press h after pressing
PROGRAM.
Playback starts from the first programmed track number.

Clearing programmed track

There are several methods, as described below.
■ Clearing the last programmed track
Press CLEAR during program input mode.
Following information is displayed.
Total number of the
tracks currently
programmed
The last programmed track is cleared.
■ Clearing all programmed tracks
Press CLEAR after exiting program input
mode.
Following information is displayed.
All programmed tracks are cleared.
The display is turned off after 2 seconds.
Note
Switching to USB mode, opening the disc tray or switching off
the POWER clears all programmed tracks.
16
En
Total time of the
tracks currently
programmed