Changing Front Panel Display; Changing The Brightness Of The Front Panel Display - Yamaha CD-S700 Mode D'emploi

BASIC OPERATION

Changing front panel display

■ When playing back an Audio CD
Audio CD
You can select the following front panel displays (1 - 3) by pressing DISPLAY.
1 Elapsed time of the current track (Default)
2 Remaining time of the current track
3 Remaining time of the disc
■ When playing back a Data Disc or USB device
Data Disc USB
You can temporarily display the filename by pressing DISPLAY.
These front panel display examples are for an MP3 file.
1 Elapsed time of the current track
2 Filename*
* 28 characters maximum
Note
This unit can only show alphanumeric characters.

Changing the brightness of the front panel display

Press DIMMER to change the brightness level for
the front panel display.
Each time you press DIMMER, the brightness level
changes in the following order:
Max (brightest) Level1 (default)
(darkest) Max
12
En
Notes
• Brightness is slightly decreased during playback, except when
• Brightness may temporarily be decreased for some operations,
• This setting is retained even if you turn off this unit.
Level2 Level3
Returns to the normal display after displaying
a filename.
the level is set to maximum.
except when the level is set to maximum.