Zodiac MX8 Directives D'installation page 3

Disassembly
1
Remove Tracks
• Remove each of the worn tracks and discard.
• Push the yellow latch release button (a) to open the top of the cleaner.
2
Remove 8 Screws and Engine Housing
• Using a Philips screwdriver, remove eight (8) screws which hold the engine
housing. Do not discard screws. These will be needed again for assembly.
• Remove engine housing. Slowly push engine paddles forward or backward
so they are clear of the housing. Make sure the cleaner wheels can move
freely as they will turn as the paddles rotate.
Page 3
a