Tools You Will Need - Zodiac MX8 Directives D'installation

WARNING - This product must be serviced by a qualified
professional with sufficient experience in pool equipment
installation and maintenance so that all of the instructions in the
product's complete installation and operations manual can be
followed exactly. All safety instructions in the complete manual
must be followed explicitly in order to prevent injury hazards.
Improper installation and/or operation will void the warranty.
Check the Box
Before starting the procedure, check the box to ensure all the
parts listed below are in your kit. If any parts are missing from
the kit, please call your local distributor for assistance.
• Engine
• Drive Shaft (2)
• Bearings (2)
• Directional Control Devices (2) (Side A and Side B)
• Tracks (2)

Tools You Will Need

You will need the following tools to do the Tune Up:
• Philips #2 Screwdriver
• Short-handled Philips Screwdriver
• Small Flathead Screwdriver
WARNING
Page 2