Protecting The Environment; Ec Declaration Of Conformity - Black & Decker KA450 Mode D'emploi

ENGLISH
Lock on (Fig. C)
To lock the tool on, depress the paddle (1) with one hand
u
and push the slider (2) right to the locked position with
your other hand as shown in Figure C.
To stop the tool, push the slider left to the unlocked posi-
u
tion and release paddle.
Lock off (Fig. D)
To lock the tool OFF, make sure the paddle (1) is not
u
depressed and push the slider (2) right to the locked posi-
tion. The paddle cannot be depressed while switch is in
locked position.
To unlock the paddle, push the slider left to the unlocked
u
position. The paddle can now be depressed.
Dust Collection
Warning! Collected sanding dust from sanding surface coat-
ings (polyurethane, linseed oil, etc.) can selfignite in sander
dust bag or elsewhere and cause fire. To reduce risk, empty
bag frequently and strictly follow sander manual and coating
manufacturer's instructions.
To attach the canister to the sander, line up the grooves
u
(8) in the canister (6) with the nubs (9) on the dust port (5).
Ensure the longer side (10) of the canister opening is on
the top side of the port.
Slide the canister onto the dust port and turn the canister
u
clockwise to lock it in place as shown in Figure F.
To remove, turn the canister counterclockwise and slide
u
the canister off.
To empty the canister, remove it from the dust port and
u
dump the sanding debris into an appropriate trash recep-
tacle.
Maintenance
Your BLACK+DECKER corded tool has been designed to
operate over a long period of time with a minimum of
maintenance. Continuous satisfactory operation depends
upon proper tool care and regular cleaning.
Warning! Before performing any maintenance on the tool,
switch off and unplug the tool.
Regularly clean the ventilation slots in your tool and
u
charger using a soft brush or dry cloth.
Regularly clean the motor housing using a damp cloth. Do
u
not use any abrasive or solvent-based cleaner.
Mains plug replacement (U.K. & Ireland only)
If a new mains plug needs to be fitted:
Safely dispose of the old plug.
u
Connect the brown lead to the live terminal in the
u
new plug.
Connect the blue lead to the neutral terminal.
u
6
(Original instructions)
Warning! No connection is to be made to the earth terminal.
Follow the fitting instructions supplied with good quality
plugs. Recommended fuse: 5 A.

Protecting the environment

Separate collection. Products and batteries
marked with this symbol must not be disposed of
with normal household waste.
Products and batteries contain materials that can be recov-
ered or recycled reducing the demand for raw materials.
Please recycle electrical products and batteries according to
local provisions. Further information is available at
www.2helpU.com
Technical data
Input voltage
Power input
Orbits (no load)
Oscillations (no load)
Weight
Level of sound pressure according to EN 62841:
L (sound pressure) 85 dB(A), Uncertainty (K) 3 dB(A)
pA
L (sound power) 96 dB(A), Uncertainty (K) 3 dB(A)
WA
Vibration total values (triax vector sum) according to EN 62841:
Vibration emission value (a

EC declaration of conformity

%
MACHINERY DIRECTIVE
KA450 Quarter Sheet Sander
Black & Decker declares that these products described under
"technical data" are in compliance with:
EN62841-1:2015, EN62841-2-4:2014.
These products also comply with directive
2006/42/EC, 2014/30/EU and 2011/65/EU.
For more information, please contact Black & Decker at the
following address or refer to the back of the manual.
KA450 (Type 1 )
V 230
ac
W 220
min 16,000
-1
min 32,000
-1
kg 1.22
) 8.3 m/s , uncertainty (K) 1.5 m/s
2 2
h