Ec Declaration Of Conformity; Protecting The Environment - Black & Decker PowerFile KA900E 1 Traduction Des Instructions Initiales

Consult your retailer for more information on available

accessories.

Maintenance
Your BLACK+DECKER tool has been designed to operate
over a long period of time with a minimum of maintenance.
Continuous satisfactory operation depends upon proper
tool care and regular cleaning.
Warning! Before performing any maintenance, switch off and
unplug the tool.
Regularly clean the ventilation slots in your tool using a soft

dry brush or dry cloth.
Regularly clean the motor housing using a clean damp

cloth. Do not use any abrasive or solvent-based cleaner.
Mains plug replacement (U.K. & Ireland only)
If a new mains plug needs to be fitted:
Safely dispose of the old plug.

Connect the brown lead to the live terminal in the new plug.

Connect the blue lead to the neutral terminal.

Warning! No connection is to be made to the earth terminal.
Follow the fitting instructions supplied with good quality plugs.
Recommended fuse: 5 A.

Protecting the environment

Separate collection. This product must not be
disposed of with normal household waste.
Should you find one day that your BLACK+DECKER
product needs replacement, or if it is of no further use to
you, do not dispose of it with household waste. Make this
product available for separate collection.
Separate collection of used products and packaging
allows materials to be recycled and used again. Re-
use of recycled materials helps prevent
environmental pollution and reduces the demand
for raw materials.
Local regulations may provide for separate collection of
electrical products from the household, at municipal waste
sites or by the retailer when you purchase a new product.
BLACK+DECKER provides a facility for the collection and
recycling of BLACK+DECKER products once they have
reached the end of their working life. To take advantage of
this service please return your product to any authorised
repair agent who will collect them on our behalf.
You can check the location of your nearest authorised
repair agent by contacting your local BLACK+DECKER
office at the address indicated in this manual. Alternatively,
a list of authorised BLACK+DECKER repair agents
10
and full details of our after-sales service and contacts are
available on the Internet at: www.2helpU.com.
Technical data
Voltage
Power input
No-load speed
Weight
Level of sound pressure according to EN60745:
Sound pressure (L ) 84 dB(A), uncertainty (K) 3 dB(A)
pA
Sound power (L ) 95 dB(A), uncertainty (K) 3 dB(A)
WA
Vibration total values (triax vector sum)
according to EN 60745:
Vibration emission value (a
uncertainty (K) 1.5 m/s

EC declaration of conformity

MACHINERY DIRECTIVE
KA900E Powerfile™ sander
Black & Decker declares that these products described
under "technical data" are in compliance with:
2006/42/EC, EN60745-1:2009+A11:2010,
EN60745-2-4:2009+A11:2011
These products also comply with directive 2014/30/EU &
2011/65/EU. For more information, please contact Black &
Decker at the following address or refer to the back of the
manual.
The undersigned is responsible for compilation of the
technical file and makes this declaration on behalf of Black
& Decker.
R. Laverick
Engineering Director
Black & Decker Europe, 210 Bath Road, Slough,
Berkshire, SL1 3YD
United Kingdom
25/11/2016
KA900E TYPE 1
Vac 230
W 350
m/min 900-1600
kg 1.6
2
) 1.7 m/s ,
h
2