Proservo NMS80
Reference calibration
Navigation
Description
Information
supplémentaire
Reference position
Navigation
Description
Entrée
Réglage usine
Information
supplémentaire
Progress
Navigation
Description
Information
supplémentaire
Endress+Hauser
Assistant "Reference calibration"
Navigation
Configuration → Étalonnage → Reference cal.
Expert → Capteur → Étalonnage → Reference cal. → Reference cal.
Configuration → Étalonnage → Reference cal. → Reference cal.
This sequence will move the displacer to the mechanical stop and set the reference
position.
Accès en lecture
Accès en écriture
Expert → Capteur → Étalonnage → Calib parameters → Ref. position
Expert → Capteur → Étalonnage → Reference cal. → Ref. position
Configuration → Étalonnage → Reference cal. → Ref. position
Defines in mm, during reference calibration, the distance between mechanical stop inside
the drum housing and the middle of the wire ring.
0 ... 9 999,9 mm
Dépend de la version d' a ppareil
Accès en lecture
Accès en écriture
Expert → Capteur → Étalonnage → Reference cal. → Progress
Configuration → Étalonnage → Reference cal. → Progress
Gives feedback on the latest status of the reference calibration process.
Accès en lecture
Accès en écriture
Opérateur
Maintenance
Opérateur
Maintenance
Opérateur
Maintenance
Menu de configuration
199