Port - Abus TVIP83900 Manuel Utilisateur

10.3.2.2 Port

If you wish to enable external access to the Speed Dome, the following ports must be configured.
HTTP Port
The standard port for HTTP transmission is 80. This port can alternatively be assigned a value in the range of
1024~65535. If several Speed Domes are connected in the same subnetwork, each camera should be given
a unique HTTP port of its own.
RTSP Port
The standard port for RTSP transmission is 554. This port can alternatively be assigned a value in the range
of 1024~65535. If several Speed Domes are connected in the same subnetwork, each camera should be
given a unique RTSP port of its own.
HTTPS Port
The standard port for HTTPS transmission is 443.
Server Port (control port)
The standard port for SDK transmission is 8000. Communication port for internal data. This port can
alternatively be assigned a value in the range of 1025~65535. If several IP cameras are located in the same
subnetwork, each camera should have its own unique server port.
Apply the settings by clicking 'Save'.
95