Auto; Tank - Panasonic WH-SDC0305J3E5 Mode D'emploi

Menus
For installer
Menu
6.3
* *

Auto

1, 2
Automatic switch from Heat to
Cool or Cool to Heat.
6.4

Tank

Setting functions for the tank.
* The system is locked to operate without COOL mode. It can be unlocked only by authorised installers or our authorised service partners.
1
* Only displayed when COOL mode is unlocked (This means when COOL mode is available).
2
32
Default Setting Setting Options / Display
Water temp. for cooling ON Direct
Set temperature for
10 °C
Cooling ON
• If 2 zone system is selected, temperature set point must input for Zone 2.
• "Zone 1" and "Zone 2" will not appear on the display if only 1 zone system.
T for cooling ON
Set T for cooling ON
* This setting will not
available to set when
5 °C
pump flowrate set to
Max. duty.
Outdoor temperatures for switching from Heat
to Cool or Cool to Heat.
Outdoor temp. for (Heat to Cool) /
Outdoor temp. for (Cool to Heat)
Outdoor temp. for (Heat to Cool)
Set outdoor
temperature for
15 °C
switching
from Heat to Cool.
Outdoor temp. for (Cool to Heat)
Set outdoor
temperature for
10 °C
switching
from Cool to Heat.
Floor operation time (max) /
Tank heat up time (max) /
Tank re-heat temp. /
Sterilization
• The display will show 3 functions at a time.
Floor operation time (max)
Maximum time for
8:00 floor operation
(in hours and minutes)