Yamaha Motor 40 Manuel D'installation page 24

PREPARATION
1. Remove:
• Self-locking nuts 1
• Steering hook 2 or lock plate
• Stud bolts 3
2. Remove:
• Fitting plate 1
• Grommet 2
INSTALLATION
1. Install:
• Stud bolts 1
• Bracket 2
Stud bolt:
20.0 N • m
(2.04 kgf • m, 14.8 ft • lb)
2. Install:
• Tiller handle assembly 1
• Self-locking nuts 2
Self-locking nut:
37.0 N • m
(3.77 kgf • m, 27.3 ft • lb)
NOTE:
Do not kink the speedometer hose.
15
E