Yamaha Motor 40 Manuel D'installation page 12

PREPARATION
1. Remove:
• Steering hook 1 or lock plate
2. Remove:
• Fitting plate 1
• Grommet 2
INSTALLATION
1. Install:
• Tiller handle assembly 1
• Self-locking nuts 2
Self-locking nut:
40.0 N • m
(4.0 kgf • m, 29.5 ft • lb)
NOTE:
Do not kink the speedometer hose.
2. Install:
• Grommet 1
• Battery cable 2
• Wiring harness 3
NOTE:
Align the taped end a of the battery cable with
the end of the grommet.
3
E