Yamaha Motor 40 Manuel D'installation page 134

PREPARATION
1. Remove:
• Self-locking nuts 1
• Steering hook 2 or lock plate
2. Remove:
• Bolts 1
• Fitting plate 2
• Bolt 3
• Hose locating plate 4
• Grommet 5
• Bolt 6
• Cable clamp 7
INSTALLATION
1. Install:
• Bracket 1
• Stud bolts 2
• Self-locking nuts 3
Stud bolt:
48.0 N • m
(4.89 kgf • m, 35.4 ft • lb)
Self-locking nut:
37.0 N • m
(3.77 kgf • m, 27.3 ft • lb)
125
E