König Electronic DVB-T FTA31 Mode D'emploi page 11

Programme Timer:
In this section, it is possible to set up to a max of 8 timers which allow the unit to automatically turn on
and record.
Timer Number: it is possible to set up to 8 timers.
Timer Mode: it is possible to set a timer (once - daily - weekly - monthly - off).
Timer Service: set TV service or Radio service.
Wakeup Channel: set the channel you want the unit to turn onto and/or recording.
Month: set the month.
Date: set the date.
Day: set the day of the week.
Note: month, date, day are actively based on Timer mode.
Time: set the time.
Auto Record: set ON/OFF.
Record Duration: select "On" to set the duration. Press OK and adjust the time with the numeric buttons
and press "OK" again to confirm. Press "Exit" to exit and save the inserted data.
Sleep Timer: In this menu, you can set a time duration before the DVB-T receiver goes into standby
mode. The time duration is from 10 min to 120 min.
OSD setting:
Subtitle display: set subtitles on or off (the function must be supported by the TV channel)
OSD transparency: set the OSD transparency to 10 – 50% or set to "Off".
Load default OSD setting: press "OK" to return to the default OSD settings.
Parent lock:
In parent lock mode press "OK". You will be asked to insert a password ("0000" or "3330"). A window
will pop up where you can lock a menu or a channel.
It is also possible to change the default password with a new one. If you forget the new password you
can input the default password.
11. Tools
Receiver info: technical data about the receiver
Game: there are two games (Snake and Othello)
Load default settings: insert the new password or default one and confirm to return to default settings.
Software Upgrade: upgrade by Air (OTA) or upgrade by storage.
12. EPG (Electronic Program Guide)
Press "EPG" to display all information available for the Channels.
11